Tradim | wall dimmer | IP 20 | Silver | 3-450W

This is the Tradim 2491H LED Wall Dimmer! This model wall dimmer stands for reliability and quality. The dimmer is compatible with most brands of switchgear and is suitable for dimming most (filament) LED lamps. Phase cut-off, manually adjustable minimum and maximum brightness. 2-wire connection. No neutral wire required. Suitable for two-way switching (hotel switching, with traditional changeover switch). Equipped with soft-start function and memory of last dimming setting. Light sources On a dimmer you use dimmable light sources. The quality of the LED bulb determines how well it dims. The 2491H LED Wall Dimmer is suitable for the following lamps: LED lamps - 12 Volt: Max. 360 Watt * - 230 Volt: Max. 350 Watt LED Filament lamps - 230 Volt: Max. 350 Watt Filament stabilizer may be necessary! Halogen lamps - 12 Volt: Max. 360 Watt * - 230 Volt: Max. 450 Watt Incandescent lamps - 230 Volt: Max. 450 Watt * Depending on the combination of lamp and driver/transformer Maximum power This 2491H LED Wall Dimmer is suitable for 3-450 W/VA or 3-350W LED. Never load a dimmer more than 80% of its maximum power! Cover plate and dimmer buttons The 2491H LED Wall Dimmer is supplied without cover plate and dimmer buttons. You can easily order these here. The standard switching material of Busch Jaeger, Jung, Berker and PEHA is suitable to add to this dimmer. Installation Always connect the dimmer according to the supplied wiring diagram. Do you have no knowledge of electricity? Then have this done by a professional! The dimmer fits in standard flush-mounting boxes. The adjustment screws allow you to easily realize the correct dimming range. TIP! Always test the dimmer before installing it in the wall. Damaged dimmers due to screwing are not covered by our return policy.